Final piece of Binding

Here I have removed the tape and now I am scraping the binding flush with the top and the sides.

I use a couple different shapes.

I have the second piece scraped down enough to now put on the 3rd and final piece.

Prepared

Done

After 24 hours I removed the tape and more scraping begins.

Here I have about 75% of the scraping done I have some more sanding to do to the carved top and will finish the binding then.

Here I have done more scraping and sanding of the carved top. I am almost satisfied with the carved top.

Almost.

Here you can see a close up of one of the joints in the binding.

All I have left with the binding in the slight radius on the corner. Will do that after I have install the neck.