Finishing the routing for the truss rod

What I have left to do is create the recess you see under the truss rod cover. Here I am centering a 1/2" bullnose bit. Using my fence. I used the same process for centering the bit that I used to before. Centering it by eye then running the piece in about 1/2 " and checking to see if it is centered. Once centered I ran the piece in until I hit my mark.

Here you see what it looks like after routing. I now have to use a wood chisel to square it up.

Here you see it during the carving.

Now during dry fit. A littile touching up and its done.

Truss rod routing is complete.