This is what I will work with. Stick belt sander and sanding pads.
One side has a single groove.
The other a double.
The crowning file was 300 grit. So I will use 300 grit paper to start. Then 400 and then 600 grit.
I use the single groove side for sanding the tops.
I use the double groove side for sanding the sides.
I do this for every fret through every grit.
As well as the fret ends.
I then use the sanding pads staring at 1500 grit and finishing with 12000 grit.
As well as the sides.
No comments:
Post a Comment